Nitrogen gets the headlines, but for a whole set of industries the gas that matters is oxygen — for ozone generation, aquaculture, wastewater treatment, glass furnaces and oxy-fuel cutting. On-site PSA oxygen generation follows the same logic as on-site nitrogen: make it from air, pay for electricity instead of deliveries. Here is what buyers actually need to know, starting with the number that surprises everyone.
Why 93±3% — and Why That Is a Feature, Not a Limitation
PSA oxygen generators use zeolite molecular sieve, which adsorbs nitrogen (and, unavoidably, argon) and lets oxygen pass. Because argon travels with oxygen, the product naturally plateaus at 93±3% O₂ — the internationally recognized band for industrial oxygen supply. For most oxygen applications this is exactly the right gas:
| Application | Why 93±3% works | Typical demand |
|---|---|---|
| Ozone generation | Ozone yield improves with O₂ feed concentration; 93% is the standard feed spec | Feed-matched to ozone unit |
| Aquaculture / RAS | Dissolved-oxygen targets are met well below pure O₂; oxygen cones love 93% | 5-20 Nm³/h per line |
| Wastewater treatment | O₂ enrichment for aeration basins and odor control | 10-100 Nm³/h |
| Glass furnace enrichment | Combustion enrichment at 93% delivers most of the fuel saving | 20-200 Nm³/h |
| Oxy-fuel cutting & welding | Cutting quality unaffected between 93-99.5% | 5-50 Nm³/h |
| High-purity uses | Needs 99.5%+ → add a purification stage, or reconsider the spec | per process |
How the Generator Is Sized
- Flow: your peak oxygen demand plus 20% headroom — oxygen users rarely have buffer storage, so the generator carries the peak.
- Pressure: standard output 0.1-0.4 MPa covers most ozone units and diffusers; booster available for special duties.
- Air supply: the oxygen generator needs ~10× its output in compressed air (zeolite PSA recovery is lower than nitrogen PSA) — the compressor sizing is where most first-time buyers get caught.
- Duty cycle: zeolite beds handle continuous duty well; tell the factory your on/off pattern so the valve schedule is configured for it.
Running Cost: The Number That Decides It
System-level electricity consumption runs about 0.4-0.6 kWh per Nm³ of oxygen. Compare that with delivered gas at typical international prices and continuous duty usually pays the investment back in 12-24 months — the same payback logic as on-site nitrogen, and our cost calculator lets you run the math for your own electricity price and current supply cost. The same factory that builds your oxygen plant builds nitrogen plants: shared air treatment, shared control philosophy, shared spares and service.
What to Check Before You Buy
- Zeolite brand and replacement interval (typically 5-8 years, same family as nitrogen CMS economics)
- Whether the quoted package includes the air compressor and pretreatment — the classic hidden-cost trap
- O₂ analyzer inclusion for continuous purity monitoring (you cannot manage what you do not measure)
- Factory acceptance testing with video — the standard we apply to every unit